Why Ghost 2 Immobiliser Reviews Is Right For You?

· 6 min read
Why Ghost 2 Immobiliser Reviews Is Right For You?

Ghost 2 Immobiliser

Ghost is an wireless security system that guards your car against key cloning and hacking. It connects to the ECU unit through the CAN data networks and is silent, meaning it cannot be detected.

It can only be disarmed by entering a specific button sequence (like PIN code) that you've programmed with the buttons of your vehicle - like those on the steering wheel or centre console.



Protect Your Car from Theft

Car theft is on the rise, and cars are stolen in just seconds. It is important that car owners think about the additional security measures they can take. Immobilisers are one of the most reliable and well-established methods of keeping your vehicle secure. Ghost immobilisers are an excellent option since they are small and concealed in the wires of your vehicle. They also do not emit radio frequency signals. This means that they are untraceable and can be fitted without affecting your vehicle's CAN bus.

The ghost immobiliser that we have installed near you is only deactivated by the pin code that we set up at the time of installation.  ghost 2 immobiliser cost  of disarming uses buttons on your steering wheel, doors, or centre consoles to prevent anyone from driving away with your vehicle. This makes it impossible for thieves to copy your key or use jamming/spoofing devices which can disable standard immobilisers.

Ghost immobilisers will not only stop your vehicle from being driven but it also prevents it from being dismantled for parts. This is a growing issue in the UK due to the increasing popularity of these kinds of cars. It can happen in less than minutes. TTW ghost immobilisers can be programmed to shield vehicles from attacks like this.

Installing our ghost 2 immobiliser will prevent your vehicle from being stolen at a garage or service station, or even if your vehicle is being driven in the garage by an employee. The Ghost can be set to Service/Valet Mode which will only allow you, the customer, to enter a unique button combination.

Contact us today if are interested in learning more about our Ghost immobilisers or if you'd like a no-cost estimate. We will be happy to assist you and provide you with peace of mind that your vehicle is secured at all times.

No LED or key fobs to indicate its place of residence.

This car immobiliser that is not detectable integrates with your car's CAN network to guard your vehicle from the newest kind of car crime. Ghost is unlike other CAN-immobilisers made by aftermarket vendors that depend on keys or LED indicators to perform the function. Instead, it utilizes the buttons on your vehicle's standard factory controls, such as those on the steering wheel or doors. This creates a code that needs to be entered to start your vehicle, which makes it untraceable for thieves.

The developers of the CAN-BUS immobiliser have added additional security methods to protect the device from being breached or hacked. It also has CAN-BUS blocking and a physical immobiliser cut meaning that even if your keys get stolen, the thief will be unable to take off with your pride and joy.

Installing the CAN-BUS in your vehicle is a straightforward and fast process that takes only 30 minutes. We will send a member of the team to your location so that they can set an appointment and time that is convenient for your needs. Once your vehicle has been fitted with a security system, you will be provided with an identification code and security codes that you can use on your smartphone and application. This makes it easier to use and give you full control over the security of your car.

The system is available on a wide range of modern vehicles, however if you have a specialist or vintage vehicle, please get in touch to find out if it's compatible. The Ghost Immobiliser 2 including installation is priced at APS449 The car will be added to the International Security Register if installed by one of our approved installers. Do not be afraid to contact our helpful team with any queries. We look forward to receiving your call soon.

Easy to Install and Program.

Modern vehicles are often fitted with immobilisers that stop thieves from stealing or hot-wiring your car. Unlike physical deterrents like locking your steering wheel or wheel clamps, an immobiliser is covertly integrated inside your vehicle, making it difficult to detect and defeat.

The unit connects directly to the CAN data network of your vehicle. It will stop it from running until you enter the unique code. The device is small and sealed, which means it can be placed anywhere in your vehicle without the need for additional wiring. It doesn't also emit a radio frequency signal so it cannot be identified by RF scanning or code grabbing equipment used by thieves.

Ghost makes use of your vehicle's existing buttons on the steering wheel, door panels and centre console to create a customised disarm sequence (like a PIN code) that must be entered to authorize the start-up of your car. The pin code sequence can be altered if needed and is dependent on four to twenty button presses. You can even put your vehicle in Service/Valet Mode so that it is still operable but it will not start or drive. This will ensure that your vehicle is safe when you bring it to the mechanic for valet parking or service and that the mechanic is unable to access your pin code to disable your system.

If you will be away from your vehicle for a prolonged period for example, on an excursion or business trip or on a business trip, you can use our app for a temporary pin. You can manually enter your pin when you drive the vehicle.

Our CAN bus immobiliser is also compatible with a remote keyfob or tracker. (Brand dependent) This will give priority to the ghost system. This is great for extra security in the event that your vehicle gets stolen or you lose your keys.

If you're seeking a way to protect your vehicle from key-cloning and hacking, contact us today to see what we can do to help. We provide our services across the UK and also at our installation center in Derby.

Service/Valet mode

Modern automobiles have sophisticated stop/start eco systems that require the right inputs to function properly like battery voltage and temperature, engine temperatures, and which electrical systems are active. Sometimes, these can cause issues and are often difficult to diagnose if it is Ghost related or not. This is particularly true if the vehicle has been recently cleaned or valet parked. If this is the case you can go into the ghost mode which allows the vehicle to start and drive without the need for a pin. This can be useful for the time that your car is being inspected or at an independent garage.

To enter service mode, press the service button five times. The indicator light will flash twice when the service mode is selected. This can be canceled at any time by entering a pin code. After you have exited the service mode then the Ghost immobiliser will return to normal operation.

It is a secluded system that works by communicating with the vehicles ECU on the CAN data circuit, which connects directly to the original vehicle buttons and not using radio frequency signals like other immobilisers. This makes it virtually impossible for any other device or hacker to bypass the system. Even jamming devices which use spoof codes from an original key fob will not affect this.

It is an TASSA verified anti-theft system that is in compliance with the highest standards of security. It also has the only vehicle marking system linking to the international security register which is an insurance company requirement.

The ghost immobiliser is a small device that is easily concealed in the wiring of your vehicle's factory. This makes it nearly impossible for thieves to steal. The sealed unit is so small that it can be mounted in a variety of places around the car, such as under dashboards and on the steering wheels.

The system makes use of the buttons you have within your vehicle (such as those on your steering wheel, door panels or center console) to allow you to create a unique and changeable disarm sequence of up to 20 presses in length that must be completed before your vehicle will start. Anyone with your pin code can enter it - so you, your family members, your colleagues, or friends can utilize it.